|
Build Your Online Product Catalogs?
Product Name: |
MPPT Solar charge controller 20A
|
Supply Ability: |
100000 |
Related proudcts |
solar controller, pwmcharge controller, |
Specifications |
20A controller |
Price Term: |
|
Port of loading: |
|
Minimum Order |
|
Unit Price: |
|
|
User¡¯s Manual SAFETY INSTRUCTIONS 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL it is not suited for nickel metal hydride, lithium ions or other batteries. 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. PRODUCT FEATURES 1.Build-in industrial micro controller. 2.Big LCD display,all adjustable parameter. 3.Fully 4-stage PWM charge management. 4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection. 5.Dual mosfet Reverse current protection ,low heat production. LCD DISPLAY/KEY MENU UP DOWN/ON/OFF MENU£ºswitch between different display£¬or to enter/exit setting by long press. UP£º press to increase value. DOWN:presss to decrease value. SYSTEM CONNECTION 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller! DISPLAY/SEETING &©|140;main display &©|141;float voltage Browsing interface Press MENU to browse different interface.
&©|145;battery type Set parameter &©|142;discharge reconnect In interface2-5,long press MENU to enter setting,and using[UP] [DOWN] to set the parameter,long press MENU again to exit. Long press [DOWN] to restore parameter.
&©|144;work mode &©|143;discharge stop
Attn£º 1.press the [Down] button to ON/OFF load manully at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load o |
Company: |
Dongguan ZUNAU Electronic Technology Co., Ltd.
|
Contact: |
Mr. Leo Yang |
Address: |
NO.534 DongAn Road,Dongkeng Town,DongGuan City |
Postcode: |
523452 |
Tel: |
86 20-31075710 |
Fax: |
86 20-31075710 |
E-mail: |
|
|
|
|